MAIN FEATURES
- Circular blades of super high speed steel HSS-DMo5, steam-treated (with bluish finish).
- Thin-tooth blades, with t3 and t4 pitch, feature a ‘BW’ pattern with constant-height teeth and alternating side rake (45° chamfer).
- Average-to-thick teeth blades, with t5, t6, t8, t10 pitch, feature a ‘C’ pattern with roughing teeth chamfered on both sides (45° chamfer), alternating with non-chamfered finishing teeth which are a bit shorter (0,15/0,30 mm).

APPLICATIONS
- Suitable for use on all types of circular saws for metals.
- Pitches t3, t4, t5 and t6 are recommended for cutting on small sections, like thin-wall tubular and structural steels (to 2 mm thick).
- Pitches t8 and t10 are recommended for cutting on intermediate and big solid sections, as well as thick-wall tubular and structural steels (over 2 mm thick).

ADVANTAGES
Remarkable reduction of noise, pressure and vibrations produced while cutting, thanks to a careful choice of the type of toothing and rakes (‘a’ and ‘g’)which are suitable to each specific blade size